Wi-Fi signal dead zones are among the most significant issues we can experience in today’s always-connected world.
What if you could have your router with you everywhere in the house to make sure you never lose connectivity?
Maybe you could take a more realistic approach and move your router to the room where it’s most needed.
Can you move your router to another room?
This post will answer this question and elaborate on how you can move your router to another room.
Can I Move My Router To Another Room?
Yes, you can move your router to a new room for any purpose, mainly to get a better signal.
However, there are some things to consider depending on the type of modem you have.
1. Router/Modem Combo
If you have a combination device that works as a router and modem, you don’t need to worry about your device’s placement.
In this case, you only have one box and get your internet via the phone line.
Internet signals go to a small socket that converts the phone line and splits it off from the internet so you can make phone calls while you are using the internet.
You can see a cable coming from the phone line going into the splitter and coming out of it in a different color into the back of your modem/router combo.
The jack where this cable goes into reads ADSL/DSL/Broadband/Fiber/Internet, depending on your internet connection type.
If you want to move this combo to a different room, you need a longer phone line cable (RJ-11) to run it from the first room to the second room.
Remember, a phone line (RJ-11) cable and an ethernet cable (RJ-45) look very similar, and you may confuse the two.
However, they have different functions and aren’t interchangeable.
Plus, you can’t put an ethernet cable into a phone socket due to their different endpin connector shapes.
If you have a phone socket in the second room, you simply plug the splitter into the phone line and connect it to your modem/router combo.
You can find different lengths of RJ-11 cables, like this one on Amazon, which is 10 meters and should do the job for you.
2. Coaxial Cables
In older models, your modem may connect to the wall socket via a coaxial cable, which looks like a cable with a needle inside.
The first thing to do is to check if you have a coax socket in the new room.
Then check if it works by connecting it to the modem.
Then you can unscrew it from the main installation panel and bring it to the new room.
Otherwise, you can get a longer coaxial cable and feed it to the router in the new room from the modem.
The one thing you should know is how to identify the male and female ends and where each one goes.
Instead of using a longer coaxial cable, you could also use a coax extension pin, such as this one on Amazon.
You simply plug the coax cable from the modem into one end and the coax cable that goes into the router into the other end.
This way, you don’t need to unplug anything or get a long cable.
3. Separate Modem And Router
Some internet service providers provide your internet connection via separate modems and routers.
A modem is a device that brings the internet to your home, while a router is a device that distributes the internet among all your wired and wireless home devices.
The main telephone line goes into the modem.
The router and the modem are connected via an ethernet cable that goes into the router’s WAN port.
This cable is the main limitation of moving your router to a different home.
In this case, you need a long ethernet cable to run from the modem to the router.
To move your router to another room:
- Identify All the Cables: Before separating the router from the modem, make sure you know where each cable goes by memorizing or taking a photo of the installation. This way, you can reinstall everything without any major issues.
- Separate The Modem And Router: After making sure you have power sockets in the new room, turn off the router and the modem by pressing their power buttons. Now, unplug all the wires and cables connecting the two devices and make sure you know which cable should go into which socket.
- Rearrange The Cables: After disconnecting all cables, take the router to the new room and decide where to put the cables. Ensure the cables aren’t under pressure or exposed to potential damage, like under the furniture or on the doors’ corners. Routing the cables is essential since they will remain in their new place for a long time and need to be safe.
- Connect the Router Back to the Modem: After determining where everything goes, you can reconnect the modem and the router. All the cable inputs are specified on the router and the modem, so you won’t have any issues reconnecting them. If you don’t have a place to take your modem to the new room, you need an ethernet cable long enough to reach from the original place to the new space where you put the router. After turning on the modem and the router, check if all the lights on both devices are on. Then, see if you have a connection on your devices. If you’ve done everything correctly, you can see the SSID of your Wi-Fi in the list of available connections.
What If You Can’t Move The Router?
If you can’t move your router to a different room or you don’t get the desired results, there are various alternatives you can try to get a Wi-Fi signal in other rooms.
Here are the main ones:
1. Network Switch
Instead of moving your router to a different room, you can take a long ethernet cable to that room and connect it to an ethernet switch.
These switches can have anywhere from four to 32 ethernet ports, and you can connect devices to them via cables.
You simply connect an Ethernet cable to the associated port on the router and hook up other devices to the Ethernet ports on the switch.
These switches are perfect for those who prefer a wired connection to a wireless one in the same room.
However, if you have devices in different rooms, you need several Ethernet cables connecting the switch and the device, making a mess of wires that makes moving about difficult.
In such cases, you need to try other methods.
2. Wireless Access Points
If you can’t get a wired connection using network switches, wireless access points are the perfect solution for you.
This way, you can transmit wireless signals to all of your devices, especially portable ones.
Access points directly connect to your router via an ethernet cable and create a wireless local area network.
It then sends the Wi-Fi signals to the rooms that the router can’t reach.
3. Powerline Connections
If you want to extend your Wi-Fi reach to different rooms but can’t move your router from its original master socket, you can use powerline adapters.
Using powerline adapters means you don’t need to use long ethernet cables because they’re just a pair of plugs that you insert into wall sockets.
They give you internet connections by communicating with each other and turning the wall socket into an internet hub.
You get powerline adapters as a pair, one of which goes into the router via a short ethernet cable while plugged into the wall socket.
The other one goes into the room where you want the internet connection, and it can be attached to the device.
The internet connection runs through the electrical wiring between the two plugs without moving your router.
These devices are very simple and uncomplicated, without any technical setup required.
However, since they rely on powerful electric circuitry, they may not work well in older houses with poor circuitry.
4. Range Extenders
As the name suggests, range extenders take your Wi-Fi signals and extend them to larger areas of your house.
They connect wirelessly to your router, so you need to put them in a place where the signal is strong.
Then it extends the signal to dead spots.
The caveat with range extenders is that they can support few devices, making them suitable only for home use.
Plus, they don’t increase the bandwidth you already have, and if you connect too many devices to them, you may end up getting a poor connection.
5. Mesh Systems
Mesh technology is an advanced way of adding more wireless coverage to your home, especially if you have a large area to cover.
The mesh system is a kit that contains a router connected to the existing router and some nodes that you put in different parts of the house.
These nodes extend the internet connection, transfer data in the network they’ve created, and strengthen the signal across different rooms.
They come with a mobile app or PC software to help configure the nodes.
After plugging the main router into your current router, it receives the signal, and you can configure the network, set passwords, and assign network names.
The only catch is that these mesh networks are rather costly and may not be worth it when you can solve your problem by simply moving the router to another room.
Problems With Moving The Router To Another Room
When you do move your router to another room, you may see that things don’t go as planned, although you have followed every step carefully.
If you don’t get an internet connection after moving the router, there are different things you can do to fix the issue:
1. Double-Check All Connections
Ensure you’ve plugged all the cables into the proper sockets, and you haven’t missed any wires.
As mentioned, although phone and ethernet cables look similar, you can’t use them interchangeably.
Make sure you haven’t confused the two.
After checking the cables, disconnect and reconnect them, making sure no cables are loose.
Although it’s unlikely, the ethernet cables may be damaged due to faulty installation somewhere on the route.
2. Make Sure The Router Is Getting A Signal
The next thing you should check is that the router is receiving a signal from your ISP.
Each router may look different, but all routers have indicator lights that show their status.
Look for the indicator that reads “Internet” or, on some models, looks like a globe.
The indicator should be on or flickering even if you don’t have any data traffic.
If the indicator is off, it shows that your router isn’t connected to the local network.
That’s where you should check your modem.
3. Make Sure The Modem Is Working
If the router isn’t getting any input from the local network, the culprit is the modem.
Unplug the ethernet cable from the modem and directly plug it into the router to make sure you have an internet connection.
If the internet indicator on the router turns on, it shows the modem is faulty.
The first thing to do is power cycle your modem by turning it off and waiting for 30 seconds.
Then turn it back on and wait for all the indicator lights to switch on.
If it doesn’t solve the issue, which is highly unlikely, contact your ISP and ask for support.
What’s The Best Place For The Router?
The placement of the router plays an important role in how strong the signals are. Here’s what to consider:
1. Always In The Center
Wi-Fi signals are like waves that you see when you drop a pebble in a pond.
That means the signals are strongest in the center, moving out in all directions.
Therefore, somewhere in the middle of the house is the best placement for your router to distribute the same signal strength in all parts of the house.
Unless you want a particularly strong signal in a specific room, you can place it in the center of the house.
In addition, you should never put your router on a windowsill as you’ll be sending most of the signal outside.
This way, you’ll also increase the chances of people picking up and stealing your signals.
2. Out In The Open
The router can be an eyesore that doesn’t go with the rest of your décor, tempting you to put it in a closet or behind other things on a shelf.
Although you may manage to hide it as an aesthetic factor, you’ll reduce the signal strength.
The place you choose for your router should create the fewest number of barriers between the router and connected devices.
Any physical object can create interference, diminishing signal strength.
3. Avoid Devices With Radio Signals
Common household electronic devices that work with radio signals can also interfere with Wi-Fi.
These devices compete with Wi-Fi and obstruct the channel, leading to poor connectivity.
Try to place your router away from devices like baby monitors and cordless phones.
Kitchen appliances such as microwaves can also interfere with radio signals because they run on the same frequency channel (2.4 GHz).
It’s never a good idea to put your router in the kitchen because of the danger of liquid spills.
4. Keep The Router Off The Floor
When you put the router on the floor, the ground absorbs some of the signals.
The best option is a mounted place like a shelf or a table to help it send out signals further away.
For example, if you live in a two-story house, the best place is on the ceiling of the first floor or somewhere on the second floor.
Try to experiment with different locations to find the best place with the strongest signals.